How to change a car battery yourself: Tips to save money

Even though you can take your car or truck to the closest mechanic to do the job, transforming the car battery at house is not rocket science and can be finished very easily. It is a reasonably uncomplicated approach and can be completed employing just a couple tools. Also, by altering the motor vehicle battery oneself, you can preserve funds on upkeep. Here is your tutorial to do that.

Also Read : How to know your car or truck demands a battery substitution. Crucial indicators to comply with

Discover the car or truck battery

Park the car or truck, transform off its engine, and eliminate the key from its slot. Before locating and touching the battery, ensure the motor has cooled down. The the vast majority of the automobile batteries are situated in the front of the car, less than the bonnet, mounted on a plastic or metal tray. Even so, some vehicles appear with their batteries positioned at the back of the car in the trunk.

Track down and disconnect battery terminals

Batteries arrive with two terminals exactly where the cables are linked. They might come included by plastic addresses. These include things like a black one, adverse, and a crimson a person, favourable a person. The terminals may perhaps appear marked with optimistic (+) and destructive (-). Disconnect the destructive cable initially, and make absolutely sure you are putting on operate gloves and eye security. Use a wrench to loosen the bolt that tightens the adverse connector to the battery terminal. At the time it is free, carefully twist the cable connector back and forth and raise it up to remove it from the battery terminal. Right after that, eliminate the favourable cable employing the very same method.

Take away outdated battery

Automobile batteries appear secured with a steel bar around them or a steel clamp at the foundation. Loosen the bolt that secures the holding bar or clamp to take away it and raise the battery out of its console. Car batteries comprise caustic liquid inside them. Consequently, make confident to keep the battery upright although eliminating it.

Clear battery tray and terminal connectors

Battery terminal connectors corrode in excess of time, which is normal. For this reason, following taking away the battery from its console, give the connectors a complete cleansing. Use a battery cleaner and a wire brush to cleanse it and the battery tray much too. Baking soda paste can be made use of as effectively. In that case, make confident to dry all the things soon after cleansing. Take a look at the cables and connectors to be certain they are not destroyed or frayed.

Set up and secure new battery

Even though putting in the new battery, make certain the red and black terminals are positioned accurately. Lower the battery into its slot in the motor vehicle and onto the mounting shelf. Attach the clamp or maintain-down metal bar and tighten the bolt to protected the battery in its area. You can look at utilizing protective felt washers or some battery anti-corrosive safety gel on equally terminals. Connect the positive cable to the battery 1st. Push it all the way down on the terminal and tighten the bolt. Repeat the identical method with the adverse cable. Make positive to check out if the battery is operating good by starting up the motor vehicle right after the set up.

Very first Published Date: 10 Apr 2023, 12:00 PM IST